0
Answered

CRC Channel

chuck emmons 7 years ago updated by Gustav Widén (System support) 7 years ago 1

In 4.06 I do not see a value in the CRC channel when using Measure or Simulate. Do we have to look on the CAN bus?

GOOD, I'M SATISFIED
Satisfaction mark by chuck emmons 7 years ago
Answered

Yes, to see the counter and checksum values, you will have to look at the bus with e.g. IQANanalyze.


For incoming CAN frames, the GFIN/JPIN and all connected parameters will be set to error status if the checksum is incorrect.


IQANsimulate will only simulate correct values.