rotating picture
It is possible to rotate a picture with a mathematical function ?
best regard
What kind og iqan?
hello and thanks for this great forum.
A have an 2001 IllerIller tdi tracked vehicle, made in Sweden. The driving system is controlled by a iqan system. I attached a picture of the screen. Is there anybody how can tell my what version of iqan it is, and what software a need for adjust parameters? I find a rs232 cable behind the seat, and I guess it is for programming iqan.
Unsuccessful MD4 program update using IQAN Design 3.15
New to forum. Looking forward to all the knowledge base available here.
To kick it off, I have encountered a situation where loading of an IQAN Design program from version 3.15 into an MD4 proves unsuccessful. IQAN Design will load firmware resources 21/21 and gets hung up on "Waiting on MD4". While on the MD4, there is a blue screen with the last line of text saying "CRC OK". I've let it sit there for 20 minutes with no change in status.
However, when loading a IQAN Design program from version 3.11 (have not tested 3.12 - 3.14) to the same MD4, no blue screen. Is this is a known bug and will it be addressed in 3.16? Is there a workaround in the meantime?
Thank you all in advance and once again, looking forward to forum.
-Manny
Module communication failure when updating to V3.19.9
We have a system (2 x MC£, 1 x MD4) running V3.19.7 and decided to update to version 3.19.9. Sent program over CAN communication tool and machine appeared to update to 3.19.9. After completion of update one module wasn't communicating over the master bus. This isn't unusual. We cycled ignition (which usually fixes error) and the module still failed to communicate. We have got this module into an endless cycle giving CAN error. Is this as a result of updating from 3.19.7 to 3.19.9?
event counter reset reverting to the wrong number - suspicious possibility
It has happened a few times to me.
Distribute vertical - MD4 7 with 3.15 - bottom object doesn't distribute evenly
Using an MD4 in 3.15, did not see a patch note that this was fixed or a post.
Hope it is not redundant to mention.
Separate On State Text and off State Text on Text Buttons on MD4
I have tried to use the Text Button but with no text in it, and then place text over the top of it which is enabled with another channel, but no matter where you put the text channel in the display order, the on state colour still covers the text when you toggle it on (on the simulator - I've not tried it on the hardware yet)
Length of translation of Headers and text fields
Custom Color pick-up not initialize properly with gradient object
When editing a color gradient with custom color it appear that the picker default to the 0% color instead of the color currently being updated.(IQAN4.01). not critical just annoying.
Iqan design 4 doesn't support G1 modem
Iqan Design 4 doesn't support G1 modem, where can i download the latest version of Design 3?
Customer support service by UserEcho
