
Module communication failure when updating to V3.19.9
We have a system (2 x MC£, 1 x MD4) running V3.19.7 and decided to update to version 3.19.9. Sent program over CAN communication tool and machine appeared to update to 3.19.9. After completion of update one module wasn't communicating over the master bus. This isn't unusual. We cycled ignition (which usually fixes error) and the module still failed to communicate. We have got this module into an endless cycle giving CAN error. Is this as a result of updating from 3.19.7 to 3.19.9?

event counter reset reverting to the wrong number - suspicious possibility
It has happened a few times to me.

Distribute vertical - MD4 7 with 3.15 - bottom object doesn't distribute evenly
Using an MD4 in 3.15, did not see a patch note that this was fixed or a post.
Hope it is not redundant to mention.

Separate On State Text and off State Text on Text Buttons on MD4
I have tried to use the Text Button but with no text in it, and then place text over the top of it which is enabled with another channel, but no matter where you put the text channel in the display order, the on state colour still covers the text when you toggle it on (on the simulator - I've not tried it on the hardware yet)

Length of translation of Headers and text fields

Custom Color pick-up not initialize properly with gradient object
When editing a color gradient with custom color it appear that the picker default to the 0% color instead of the color currently being updated.(IQAN4.01). not critical just annoying.

Iqan design 4 doesn't support G1 modem
Iqan Design 4 doesn't support G1 modem, where can i download the latest version of Design 3?

Increase "Setting memory size"
Is there any way to increase the size of the memory settings in an MD4. I am using quite a few of the "Memorizing Channels" and 29kb is not enough room for what I am trying to do. Or is there a way to save a value to a log and retrieve that value in the code?

IQAN Design Page layout
When opening a project:
- The Project manager window will always right justify. This makes most of the project structure inaccessible until you move the cursor back to the left.
- Often the property inspector makes the property side very wide as compare to the value side. Not sure if this is because I am jumping from screen to screen with different layout but to me know most of the properties and I am more interested in the current value. so I have to constantly resize the ratio of the two columns to reduce the property

iso 7000-2596
Is there an alternative image I can use for the malfunction/failure of emission system in the library?
Customer support service by UserEcho