Hello, I have used MD3 module and have also flashed my program in the kit as per standard process. But unfortunately today am not able to flash my program in to the MD3 module.

it says error - "No handshake reply from master module Unknown"

Can some one help me the solve this?

Highlighted features

MD4: Support for rotating images Added new property Rotate on Image controls. Example usage, a wheel position indication for all-wheel-steering: Pixel size at font size properties In addition to the predefined font sizes (Tiny, Small, Medium, Large, Huge) it is now possible to enter the font size in pixels directly (as an integer). Implemented for label and value controls. Application documentation, add adjust items Included adjust items and parameters with limits in the auto generated project documentation. Remove logging of saturation warning Logging of the COUT saturation warning is now removed. COUT status will still indicate if the output is saturated (unable to drive the commanded current). IQAN-SV Add module info in menu system Information about an IQAN-SV camera can now be shown after it has been assigned by selecting the camera in the camera menu. For more info on feature updates and problems solved, see release notes

When using a boolean function in QCode we were able to link to a comment. Is that intentional or a bug? :)

Top one is a finite state machine, second one is the comment.

Another J1939 related suggestion. For incoming CAN traffic, JPIN blocks have a "J1939 error check" property. I assume this will set the value to 0 (or as defined in "error value") when the value is marked faulty by giving it a high value (11 for 2 bits, 1110 for 4 bits, 0xFE for bytes, et cetera). J1939 states that, besides sending out DM1, erroneous values should be marked with that high value.

But I'm missing the same property for outgoing traffic. Would be nice if JPOUTs have a "fault active" property that can be linked to another digital block. Now I have to make an extra math block in between, and can't utilize the built-in "Offset / Scale" properties.

Is there a way to have a button on an Interactive Message open a PDF? I am unable to figure out a way to accomplish that.
We would like to have it so a customer can get more detail on the message that just was displayed.

Something like this

Hi,

Is it possible to include images of the finite state machines in the project documentation? Using screen captures works fine for me for now, but I tend to use them more and more in pretty important functions (they are amazing). So it's not a big deal for me right now, just noticed it isn't there.

(Using 4.00 still)

When selecting the input channel to be used for a gauge, or value on the display it is nice that you are able to just type in this field and it will bring up selections. However this only works if you start with the same name as the input channel. It would be great if you could use wild cards, boolean type, or "contains" searches in this field.