1. Forum: Software
  2. IQANdesign
+1

IQANdesign 3.16 released

Gustav Widén (System support) 10 years ago in IQANdesign • updated 10 years ago • 0
IQAN Creative Studio 3.16 in now released, the main changes are in IQANdesign.

Highlighted features and changes


1810 Add new module MD4-10
The 10" (26cm) version of the MD4, the IQAN-MD4-10, has been added to IQANdesign. 
Image 81

24020 MD4: Decrease minimum cycle time
The minimum cycle time on the MD4 (all versions) have been decreased from 25 to 10 ms.
Image 80

Highlighted problems solved


24563 MD4: Backlight flickers in supply voltage range 12-14V
The MD4 had a function that automatically reduced backlight for supply voltages <14 V. This reduction caused the display to flicker for small supply voltage variations in the range 12-14 V, and has now been removed. 
Note: There will still be a decreased backlight intensity below 12.5 V due to hardware restrictions.




For complete release notes on IQANdesign, see:
http://divapps.parker.com/divapps/iqan/Downloads/IQANdesign%203/ReleaseNotes3.16.8.htm

+1

can variable updating

Zach 10 years ago in IQANdesign • updated by Gustav Widén (System support) 10 years ago • 1

Has anyone else had an issue with spn warnings getting stuck on?

They update when I pass another spn message on the can, but some don't seem to turn off until instructed of another change.


Is there a way to trigger my spns to be checked and updated?




+1
Declined

DMAC & MAC - Store Value - New property request

Nick Pridham 11 years ago in IQANdesign • updated by Ulrik Zakariasson (Software development) 8 years ago • 4
It would be nice to have a store value property for these channel types. This is very useful when calculating totalising statistics. For example: the total angle movement of a boom can be calculated with a MAC running the derivative calculations and a memorising channel storing the value on a timer loop. 

A store value property in the DMAC/MAC makes it a bit neater. 
+1

Backlight auto-adjuste

Florent Mirieu de Labarre 10 years ago in IQANdesign • updated 10 years ago • 3

Hi


My customer use product during the day and the night. The problem is in night the backlight is too hight. It is possible to change with the menu, or with a button to switch in night mode. it's work but is not auto-adjuste.


Three possibility to do an auto-adjust-backlight

1 - add a light sensor (light Garmin GPS)

2 - add a function who calculate the sunrise and sunset with latidude/longitude in input. I have made this fonction it is works great. But if the system loose date or the customer change place (it is possible with our product), it doesn't works. Like that there a number 3

3 - add a GPS module on your module (now a GPS module is very low cost (5$)), like that always on time, you have the real speed, and you can use the auto-adjuste-module


Regards


+1

New stile for adjust menu

Dingoma 10 years ago in IQANdesign • updated by Ulrik Zakariasson (Software development) 10 years ago • 2

Hello.

Sometimes, when our customers try to tune the crane, they get confused with plus/minus "menu"

Usually, at least for a crane, plus and minus adjusts aren't similars in values (start, stop, min and max) for one movement, I think it would be an improvement to allow customer to modify values in different screens for plus and minus movement. It would be a good improvement to include a photo of the movement that they are adjusting.

Image 236


+1
Answered

How to handle popup messages when video is running?

Ulrik Zakariasson (Software development) 11 years ago in IQANdesign • updated 10 years ago • 4
+1
Answered

Integer vs. real values

Arno Heeren 10 years ago in IQANdesign • updated by Ulrik Zakariasson (Software development) 10 years ago • 2
Hi,
the answer might be interesting also for other users:
When should I use integer and when real values?
CAN-communication is one example where I see benefits using integer values.
Thanks.
+1

backlight in multi display setup

Ed Schippers 10 years ago in IQANdesign • updated by Gustav Widén (System support) 10 years ago • 1
Multi display setup, MD4-7” (master) and MD4-5” (non touch) I want the backlight of the 5” display to match the 7” It would be nice if this could be done by using the backlight setting of the master by means of a system information output or an option in the backlight control setting of the other display to bind it to the setting of the master. Instead of an extra adjustable parameter.

Regards,

Ed
+1
Answered

NMEA 2000

Kerim 10 years ago in IQANdesign • updated by Alex Deyhle 2 years ago • 8

Hello forum users,
I would think to use weather station for a mobil project by IQAN. Weather station use NMEA 2000 communication protocols.So I did internet research. The NMEA 2000 protocol is based on the j1939 higher layer protocol. Can I use iqan module for NMEA 2000 protocol ?

+1

IQAN training schedule 2016 update

Gustav Widén (System support) 10 years ago in IQANdesign • updated by Jan Gillesen 9 years ago • 12

The 2016 schedule for IQAN training's are now available:

IQAN trainings Sweden

IQAN trainings US

IQAN training UK, new IQAN training in UK arranged at NFPC



During 2016, there will be both introduction level training, and training days focused on the IQAN Creative Studio version 4 updates.







Customer support service by UserEcho