CRC Test.idsx

This idsx calculates the CRC correctly. however the receiver will not accept unused bits set to 1. The CRC simulator calculates correctly. How can we set unused bits to 0?

Currently trying to connect to an MD4-5 via ethernet (using D6). When I connect the ethernet cable to my computer directly from the MD4, it says it is offline and no master is selected. The MD4 also does not show up as a device on the same network. We are using a generic ethernet cable and wondering if this could be a wiring issue? MD4 powers up when the system is ON.

Hie there...im having challenges getting pitch and roll from my UTS-G module. Address assigned to the module is 0 and it is registered by the MD4 master but no data. Ive set the resoulution to 0.002, offset to -64 and length ton 2 bytes on my J1939 parameter in channels. Kindly assist

Hello Everyone,

Today was my first day using IQANdesign (version 6.08). I'm glad to report that I found most things intuitive.

I'm trying to send J1939 parameters from one master module to another. I've linked the parameters to a J1939 Frame out, but I can't get it to shake the error "Unassigned". I've read elsewhere that JFOUT needs to "be linked to a module".

Some way to drag and drop channels into an object list would be cool. It would save a lot of time having to select single object then going over and typing or selecting the channel. Even it was just limited to the same function group.

Hello 

For Custruction machines a CCTV system should comply to ISO16001.

Does the IQAN-SV and the Screen MD4-5" are complying to this standard??

Regards

A.Pauly

How can I automatically update the System time for daylight savings (summer time)?  There is no additional device to use TDA?

ie if the Multi Master system is time synced with IQANrun during Summer Time (+1hr), then when the daylight savings finishes nd we go back to Winter Time, then the time is now incorrect.  Visa versa for Time Sync in Winter Time, when we enter Summer Time. I tried to find any articles in this Forumn, but  could not.

Thanks

Julian

I've looked through the various IQANdesign/IQANrun docs and can't seem to find anything that spells out what characters are acceptable for use as part of a cleartext password. Can one use characters from the Extended Characters Set (0x80-0xFF) to create a cleartext password?

Hello,

After loading an application the first time, our experience is that the expansion modules have no contact with the master, after restarting the system (often twice) the connection is there again. Can you tell me if this is a problem or it is just a downloading issue when an application is loaded.

Iqan design 6

MD4 and XC42

MD4 and XC43

Kind Regards

Laura