If the “Value” is a long text string, then it is clipped on in the Adjust Parameters Menu. Please make this text fully visible.

There is an issue with the Active Color in the menu system, and when you select an item via external button controls.

This is what I have mine set to.

This changes the button depressed color like it should on display pages.

But in the menu system it is still the amber/orange color.

And then with the External Button Controls it is a mix.

I have a system that has 800 DM1 messages that all have to be logged when they come up.is there an easy way to load this into a diagnostic log group and trigger the log file as they come up?

1) I would like to open directly to the Info and Module page via a button on the display. You can open to every other sub menu page but those two.

2) Is there a way to open to these pages via an external button. Becasue I will need to do that, but cant figure out how to.

I'd like to be able to export the top pane's report to a spread sheet for easier manipulation to create a printable message list sorted by source address from a recording. Would like be possible?

This is the second time this has happened to me. I go to open a program and get a Corrupt File - Stream Read Error. What causes this. And is there anyway to recover the file. I really don't like loosing a days worth of work.

For some reason the MD4 is not discovered, but this should not be a problem, I have the IP address. But I cannot enter a static IP address in the 169.254.nnn.nnn range I get warned that only addresses in the 10.0.0.0 to nnn or 172.16.0.0 to nnn or 192.168.0.0 to nnn

Trying to retrieve clone file from machine but keep getting error for application mismatch. The error is described as " No corresponding application exist for the firmware being loaded " .The ida file in the machine is fully updated to the newest version along with our IQAN Run. Any thoughts? Thank you!

Hi everyone, i try to config the IQAN G2 module, but there are an error that IQAN run cannot recongize Can modem. My can-adapter cable is IFM EC2112, i dont know that because the cable or not. I already try in IQANRun 3 and 4. Any body introduce me the right name can-adapter for IQAN G2, thank you so much.

I created application with 4.02 version. Am using MC2 and second bus is already use by generic module. Now if change something (with 4.05) in application asking me to connect the diagnostic bus, but a don't have one free.. the problem is that a just change my computer and don’t have old version installed and isn’t on the web site.