I need to be able to display multiple FMI error messages  that are being broadcasted from the same SPN in a DM1 J1939 engine broadcast.

SPN = 3251

FMI = 3

FMI = 4 

FMI = 7

The IQAN system MD3 running with 5.06 will only display the highest FMI occurance which in this case is FMI = 7.  The other two FMI's are not displayed.  If a single FMI is present from this SPN, it will be displayed.

Any one done this before?

I have a system with 1x MC42 and 1x XA2 module. I am getting what i believe are random shut downs and has to be manually power cycled. The unit doesn't throw any error light codes that I have seen and there are not issues on the logs when i pull them. I went ahead and measured my cycle utilization and memory utilization. The cycle utilization is running consistently at 45% and the memory at 27%. I have checked for small things such as lose wiring etc.  

Has anyone encountered a similar issue? 

PS this is the second module to do this. We have replaced the module after thinking it was possibly something with the hardware. 

I have had the latest Design and Run 5.05.8.55.04 software crash multiple times over the last few days both while working offline as well as remotely connected to a machine. This is causing a lot of issues for me. Has anyone else experiences this?

Version 5.05 of IQANdesign, IQANrun, IQANsimulate and IQANscript is now available:

https://www.iqan.se/store/downloads.html

New features

Keypad style adjust for parameters

In the menu system, you can tap on the value of the adjust item to bring up a keypad-style adjustment:

CAN routing on MC4xFS

The CAN routing feature is now available also on MC4xFS. 

The above features will soon come in the 6.01 release also.

Version 5.05 also include some of the features already introduced in 6.00:

Add Blinking Lamp status to J1939 DM1 decoding

When enabled, the lamp status MDGN:s will blink according to DM1.

IQAN-SV properties for flip/mirror/bitrate/HDR moved to video control.

This means that individual video controls can have different settings.

Support external esc key in PDF reader

Implement full circle mode on gauge

For details, see release notes:

http://divapps.parker.com/divapps/iqan/Downloads/IQANdesign%205/ReleaseNotes5.05.8.htm

http://divapps.parker.com/divapps/iqan/Downloads/IQANrun%205/ReleaseNotes5.05.5.htm

http://divapps.parker.com/divapps/iqan/Downloads/IQANsimulate%205/ReleaseNotes5.05.4.htm

http://divapps.parker.com/divapps/iqan/Downloads/IQANscript%205/ReleaseNotes5.05.4.htm

Hi.

I have noticed that sometimes my MC43 gets stuck in a "Bus-off" state (Error code 3.4) a it does not recover, until I shut of the entire system. In my case the controller is used for steering and I need it to be able to reboot and recover locally on its own, in order for me to uphold my steering functionality without shutting down my system.

We have put in a functional request for this, and I'm just reaching out to see if anyone else is experiencing the same problem?

Regards

David PH Sc

Why does IQAN 6 not support MD3?

How to make function about CRC 16 in parker? Current only CRC-8 and J1939 checksum function block for selection.

I'm trying to find a way to show the J1939 DM1 lamp status. The MDGN channel will show the lamps on or off, but there are varying levels of flashing indicated by 65226 that I can't seem to access.

Are there any plans to include the flashing levels in the MDGN channel?

Thanks!

Hello! It would be very convenient to be able to insert images into Comments (or as separate object). Graphs or schemes, for example.

Hello All,

It would be nice that error messages of each input or output could be independently disabled.

I'm aware of the function group method:

https://forum.iqan.se/forums/1-software/topics/662-disabling-error-message-for-a-specific-output-when-its-not-in-use/

But I might want to disable the automatic error message of a particular output or input, and still being able to identify its error state, rather than stop evaluating it.

For example, I might want to "retry" the activation of an output in overcurrent/short state, and only show a custom error message after a few tries.

Or, in case some output is not always connected to the load, but it needs to be continously turned on. For example, an output for optional working lights, or position lights, which are connected to the machine when needed, and always removed when not. I don't want to bother the operator turning on/off the output, neither with error messages if always on. ( open-load detection can't be disabled output by output on some modules ).

Thanks!