Large Array Usage
IQAN design 4.01: MD4 - 7" - The IQAN design manual indicates that large stored arrays can impact on utilisation. Is there any guidance or application experience for usage of large arrays. I am planning approx. 80 x 100 cell array channels.
MD3-Adjust Group-Reference Channel-Will only display to one dec place on the MD3 screen.
The IQAN run view is fine.
TP Channel Question
Is there a Q code function for parsing out the value of a text string (TP Channel)? I want to write the ASCII ref for each character of the text string to an array.
Q code for how many characters in the text string?
Q code for get character 7,6,5,3,2 ... from a TP channel?
adjustable button not working - 3.18 - no passcode prompt
I get prompted for a pin code, enter it, and then can adjust as I desire.
I have a windows 64bit system.
On the md3 and on the md4, the pin code prompt does not come up, and the adjustment can't be made.
This machine has three pin codes.
Only one of the sets is not working that I am aware of.
Three coworkers, with their three laptops, could not get the pin code page to come up.
I wondered if it was because they are using 32bit machines maybe.
I don't understand why the md3 and md4 will not prompt for a pin, or let them do an adjustment.
What I mean is that when I hit the button on my computer in the simulator, I get brought to the pin entry page. I put in the pin. I then am able to do the adjustment.
Two coworkers are unable to be prompted for a pin or make the adjustment with their laptops.
They also are unable to get prompted or make an adjustment at the machine on the md3 or the md4.
Program is in 3.18.
This is kind of urgent.
Software Roll Back
Hi, is it possible to roll back from 3.xx to 2.xx. I tried starting in safe mode but this did not work.
The requirement is generated due to working with different clients who are at different stages field software usage. I only have one MDL2 for testing and just wanted to be able to go back and forth with software OS's.
Thanks
Nick
To create a macro for CANopen on the IQANanalyze
For example. I would send NMT start. I can use macro I have saved previously.
Calculation Overflow - MD4 Nuisance System Logs
Is there any sort of way to disable "calculation overflow" from making a log in the system log in an IQAN 3, MD4 application?
I know that I should probably make my program not have calculation overflows in math and J1939 output channels in the first place, but when these errors pop up, despite the best programming intentions, and are logged, it worries the customer, who usually thinks something is wrong with the machine.
Thanks!
Wifi adaptor to connect to MD4
Ajdusting Dither Amplitude
IQAN 4.00 J1939 parameter in bug
I have a block of code that worked well under v3.19 that is missbehaving under v4.00.
A MC31 master is receving J1939 frames from another non Parker device. In debug mode the frames are "green", meaning no timeout situation. The associated J1939 parameter is "red" and I am getting the replacment value. I first tough it must be a J1939 error check, so put the J1939 error check to "no". Same situation, no change, parameter is "red".
If I remove the scaling and offset ot that J1939 parameter, it works, and becomes "green"! I then need to do the scalling/offsetting in a math channel. This is not normal! Please advise.
Thanks for your help.
Customer support service by UserEcho
