JFIN longer than 8 bytes
Is it possible to read J1939 messages larger than 8 bytes? I find no way of doing this. When adding JPIN's to the JFIN, maximun bit offset is 64, and there is no option for setting a longer message size. Are segmented messages not suported? It would be used to read a 16Byte broadcasted message.
I'm on IQANdesign 3.18 , Aplication for MD4
Thanks a lot!
DM1 - Multiple SPN's
MDL2
IQAN Design 3.19
SPN Conversion Method 3
Cummins T4F
I am having a problem with getting any more than 2 SPN's to pop up on the MDL2 screen. Looking at the project file I have 10 active SPN's.
The project file has 210 SPN's.
SPN conversion method 3 is called out by the engine spec. I have tried all the others and they don't seem to change the situation.
MD4 problem with log
On the display ( MD4) we have a windows with CAN error. (see below, one example of message)
When the custumer deleate the message on the display, we don't find the recorder message on the file log. It s a big problem for him to analyse the origin of it.
We have a need to see this message on the log file to help the custumer to identify the problem.
I have the same problem with all messages errors.
We don't understand the reason why !!!
My système is composite of 1 MD4 and 2 MC3
my log directory contains 7 Item log with the same settings.
We think that we put the good setting inside.
Enable , visible are " YES" and the Log full behavior is " Continue logging" ( see below )
Do you have a solution for record the error message in the log fil ?
Please feel free to contact me if you have any questions .
MD4 ISO image size problem? Bug?
image placed size 80x80
same image placed but with size 40x40. it looks ok but when you look at the text you see the width and height already changed
after closing this display page and opening is again both an the same size
I also tried to rename one of the images, but it gives no difference
Regards,
Ed
CAN Transmission speed
Hello
Here's my system
Following a slow sampling time, I've changed the MD4 and Mc3 to put a 10ms.
Now the CAN frames emmise by MC3 to MD4 are not always read by the Md4.
The cycle time can it affect the speeds of the CAN messages between two master module ?
Best regards
import new front
It is possible to import a new Front with a .ttf file in my project for label and value ?
Best regard
Jean-Baptiste
RGDH
Develloper for IQan system
analog input filtering
In my system, I have an angular sensor.
That value varies continuously (example: 2.56 --- 2.65 --- 2.48 ---2.65...).
How can you filter signals to avoid having oscillatory values and have a fixed value?
Best regard
Font Selection
Eg: I want engine's "RPM" in Times New Roman and in the same page "ºC" of Engine Oil Temp in Arial.
Best regards. Diego.
Video control on different display pages for one IQAN-SV
It would be nice to be able to use one IQAN-SV video stream on different display pages.
When i try this now one video control works but when you change display page the other video control says "Cam Connecting".
It would be nice to be able to use one display page with a full screen video stream and another display page with a smaller video stream for the same IQAN-SV. Then its possible to display some info on the side of the smaller video stream.
The user would then have the ability to toggle between the pages to choose if he wants full screen video stream or a smaller stream for the video but with the advantage of having some info from the machine displaying on the same screen.
It would also be nice to put some information on top of the video stream.
Customer support service by UserEcho
