I am working on a couple of projects where we want to use a PID loop for motor RPM control with encoders for feedback.

I set up the program with the encoders for feedback but when I run the simulation, the valve drive goes to zero when the encoder count matches the commanded speed. Based on this it appears the PID is set up for positioning. Can it be used for closed loop RPM control? 

unable to receive destination specific pigeons in iqan desgin version 5 ,Please help me by providing idea of how to configure destination specific JFIN pigeons  

Hello

The C-standards of a lot of mobile machines forces the machine-manufacture to have for the operator/driver 24x official EU-languages. Service technician only need to have up to 4x languages. That's the reason that the operation manual must be printed in 24x EU-official-languages and workshop manuals only up to 4x. 

I can set up in Parker IQAN only one multi-language block. Would it be possible to have two multi-languages blocks available: one for the operator, one for the service technician.

Regards

Andy Pauly

The multi master system i build has 3 MD4 displays.

0ne of the displays , not the head master, had some problems with the screen so needed replacement.

So I took a clone file of the system, using ethernet on the head master. the upload, specially from the other  displays, this took forever. around 2 hours. 

After getting the clone file, I send the file to the new display , disconnected the rest to safe time

This worked only partly, functionality was ok, but a lot of pictures of lamps and buttons were missing.

I send the clone to the complete system. again it took forever and with no better result.

Then downloaded the setting,  opened the clone file in design en uploaded from there, this again took ages.

This worked ok, after sending the settings all was running perfect.

What could have been the problem with the pictures?

And is there any way to speed up the process? 

Hi,

I have problem abut setting load weight on my IQAN, i want to add chanel for load weight, because i want to add chanel to overload too, but icant count how is the load

please help how i can solve it,

Regards

mnr

It would be nice if multiple master modules could access the same IO of a single expansion module. As it is now, one master module would have to pass the  value to the other module. This would also allow for redundant master modules.

Is it possible to export a IQAN Run Measure File .irmx to excel?

When the language is switched to Russian - the menus and messages are all blank even though in simulation they are all showing.  Is this a font issue?  Should I be using a different font for Russian?  It is set to default in the program.

I'm trying to let the user decide by using the Master display whether he wants to save the data in a measurement file or no. Is that possible to have a button which will allow me to Record the data in an Excel file? Does anyone have an idea how to do that?

For the calibration of a Gear speed sensor P/N:01712ECD, the gear that I'm using has 50 teeth, so I'm doing that calculation based on speed sensor output 10 kHz then 10000/50=200 rpm as my maximum rpm. Is that what I have to do in my calculations?