MC43 Directional Frequency in
I get an error when using the directional frequency in as speed/direction on an MC43.
The channel turns red and gives and error as soon as I change the property to Frequency/direction.
Gauge tick count
If the Tick Count be same number as max value the scale be weird. In the snap shut below you can see 4 are missing.
I solved the error by use 9 ticks.Generic CAN and simulation
I have a design involving MD4 and MC2 multimaster setup in a Generic CANbus. MC2 feeding values to MD4 via CAN. When I run the simulation of the design the values do not seem to pass on to MD4 display. I have double checked the CAN frame address and field definitions and they are ok.
However, if I create a Simulation group for MD4 and get the channel updated directly from MC2, then I can see the value changing. But I'd guess this bypasses CAN messaging completely and uses Simulator's own message passing mechanisms.
Is Generic CAN messaging simulation something that is not supported? Or am I doing some fundamental mistake here?
Adjustable IP address
We have a number of systems that use the same project except that they require different static IP addresses. We need to make and update separate programs for each system to accomplish this. It would be nice to have the IP address as an adjustable parameter so that we can maintain one IQAN project for all of our systems.
SMS out
Hello
It is possibel to send one SMS with Texte + data ?
Exemple SMS (juste one SMS : Hello : Your pressure is of 152 bar.
With 152 bar ( Math channel )
and Your pressure is of ( Text parameter channel )
Thank
Allow Simulation Change of Value with FGI
It would be really nice to be able to use the FGI channel to change the underlying value of the referenced channel when simulating. Otherwise it appears that it is required to navigate to and from different function groups in order to change the value and subsequently see the results of the change. If there is another method, please advise. Thanks
There is a way to do a factory reset ?
There is a known method to execute a factory reset on an iQan master controller ?
To be more specific, I'm looking to do this on a MC31 master.
This is to be sure there is nothing leaved on the master memory/configuration for testing purpose.
Thanks!
IQAN MDL2 - Parker display
I bought the IQAN MDL2 display, but i really didn't know it was a blank unit. Anyone can help me for program installation? or some instruction what i can do on the display, please?
Best Regards,
Wandi
Bekasi - Indonesia
project documentation
The project documentation tool is excellent. Would it be possible to go one step further and create a section or a separate document that lists channels with their properties (including channel scope and calculation order) and Object List / Qcode? Thanks.
Error Iqan Run
Hi, we encounter som problems with Iqan run get and view, see picture
Thanks, Ed
Customer support service by UserEcho