We used to have a remote login option so somebody who had IQAN Run Pro on a tablet could access a machine at another location through IQAN Sync. Now we seem to have just WIFI or Bluetooth, no remote. Running IQAN Run Pro 6.00.8. Is there something I am missing?

Not sure if this is exactly a bug, but it is annoying nonetheless.

In IQAN Design 5.03 or prior, it was possible to make Global Scope Variables inside Library blocks. So made a whole bunch of libraries, using that feature. Works all fine, until IQAN 5.04 or 6+, where these Global Scope variables cannot be accessed anymore.

We  "fixed" this for some machines by changing the libraries, turning global scope vars into Function Group outputs and doing some re-wiring of the blocks. But many of the older software versions didn't have this change.

Now as long as you open these older versions with IQAN 5.03, everything is ok. But open them with 5.04 or newer (accidentally), and the file is basically broken once it is saved.

Can Global Scope Variables inside Libraries return in newer versions of IQAN 5 or 6?

What is the min/max resolution for PWM outputs? We have an output with its min and max set to 13 and 22%, which is, I think, quite narrow. Making the max 1% higher makes a big difference already - does it help to provide floating-point numbers (ie, max := 22,3 %) or will these numbers get rounded internally?

Same question for the actual output. Does 13..22% mean the output will only have 9 steps? Or could it deliver an output of, let's say 16,35 %?

For the info, we are using a MC43 "single pin" output, C1:47, on a 125 Hz frequency.

Hi Guys,

Since in J1939, Transmits speeds of CAN messages can very, i.e. 1 second transmit rate, changing to 100ms on function, at present, only a set figure can be put in to the transmission speed.

If this could also be available to look at a math channel, then thing like DUELs could be used to change the speed.

I am starting to play with IQAN script and trying to see what the real benefits are. Any insight as to what people are using it for, or if anyone is willing to send me some files to look through and play with (other than the example) I would be interested in dissecting it a bit. 

Any insight is appreciated, thanks in advance.  

Hello

I am working with IQANdesign5.04  and IQANdesign6.00. I have a new computer with the hardware of

Intel Core i7-8565U CPU 1.80 GHz  RAM 32GB 64Bit System Windows 10. The latest Hardware and Software update are done 

and IQAN is very slow on large application file (27.323KB).  

It take 1 Minute and 18 Seconds to open parallel to IQANdesign also the Simulator and during this boot up time the CPU is used  by only 27% and Memory only 27% and graphicCPU by 6% during this boot up time . 

The computer is for 1-2 Minutes out of order by copying a state machine with 60stages. Afterwards it takes almost 5-15 second for any change inside the stage machine. I can only work on the IQAN application software without losing my patient by safing and open the software again. Only then the software is fast again. Here the CPU is only between 12-18%; memory by 14-21%. What can I do that IQAN uses the full potential of the available hardware?

Regards

Andy Pauly

How do I increment a value  by a fixed amount when a condition is true? I do not want it to increment again until the condition is false then turns true again. 

I am trying to set a requested engine speed using a MACI channel. When I bump the throttle switch for less than 350 ms, I want to increase the channel by a 25 RPM increment. It seems that the simulation is adding 25 RPM to the channel on every cycle. I am getting several increments of 25 on each bump instead of 1 25 increment increase. 

If I hold the throttle input for more than 350 ms, I want to add 50 RPM every 250 ms to control to the throttle rate. I was trying to using a timer channel to increment the value by a fixed amount every 250 ms, but it seems this is happening faster than it should also.

Why is the 1000kbps setting not available in IQANdesign for MD4-7 display modules? Is this a limitation of the hardware? Most modern CAN transceivers and controllers should support this baudrate, so I am confused why it is not available.

Hi, I tryed to open a 6.00 MD4 application on Androïd and Iphone IQANsync as well to send it through a G5-Bluetooth modem and the IQAN file wasn't supported by the phone application. Are you expecting to provide a new mobile app on one or the other platform soon ?

Thanks

Are they going to come out with "gauge plugins" or offer gauges similar to what Murphy and other companies offer? Ive custom made some on previous applications but it takes time and can be a pain.