Is it possible to export a IQAN Run Measure File .irmx to excel?

When the language is switched to Russian - the menus and messages are all blank even though in simulation they are all showing.  Is this a font issue?  Should I be using a different font for Russian?  It is set to default in the program.

I'm trying to let the user decide by using the Master display whether he wants to save the data in a measurement file or no. Is that possible to have a button which will allow me to Record the data in an Excel file? Does anyone have an idea how to do that?

For the calibration of a Gear speed sensor P/N:01712ECD, the gear that I'm using has 50 teeth, so I'm doing that calculation based on speed sensor output 10 kHz then 10000/50=200 rpm as my maximum rpm. Is that what I have to do in my calculations? 

For a new project where I have to make an inputs and outputs configuration, we are have running Iqan design 6 beta, our problem now is that is is not possible anymore to open iqan design 5 applications in Iqan design 5 by clicking the filename. All the applications are opening in Iqan design 6, and that SW doesn't support the older expension modules. 

The next problem is that for our data management container double clicking is the only way to open files.

It is also not possible to change the program by change the default program in the settings of windows 7 or 10.

I have uninstalled the 6 beta from my computer and I had a little bit of trouble to let the Iqan design 5 applications normal again.

Is this solved in the released design 6 version?

Kind regards Laura

We a lot of machines out in the field that still has MDM's that were programmed with the old IQAN develop. Our company is upgrading all of our laptops to Windows 10, am I going to have issues with any of the software for the older machines? We use design 2.63 on a lot of machines and develop on a smaller amount. Any insight into what will work and what won't would be a great help.  

Hi,

     I am new to this environment. if any one guide me on how to design and upload code to MC43 controller.

     Step by step guide will helpfull.

    Thanks in Advance

I'm using IQANdesign 5.04.14.5377. When laying out a new machines program, typically all the I/O is placed in the master application just as a place holder. Then, function groups are setup and the I/O is arranged into the desired function groups for programming the control logic. The issue is when a channel is dropped from the master app to the new function group, it lands way down the page. It take 20-30 sec. to grab the channel and move it back to the top of the page. is this a glitch or was this intended to be this way?  

Hello, 

I have a bug/error every time I want to save measure from the multimeter (custom group of measure). IQANrun crash and I can't save my measure. 

Can you please check this out ? 

Thanks in advance

Hi,

I'm having trouble connecting the G11 to a MD4.

the bus i use is B, wiring checked, resistors checked.

security setting on always allow

but still no contact whith the G11

the status LED sends waiting signal

i made a can reading but it looks like that there is no reaction from the G11 because there is no difference in date when the G11 is disconnected

the last time i used this G11 is about 2, 2.5 years ago, is it possible that it does not work with design 5?

or is it just broken?