Hello,



I’m experiencing a MC2 VREF error high 6.60v show up on a MD4 display unfortunately the product is not currently here to troubleshoot but I would like to know if this may or may not be an already known Bug with master to master communication/hardware monitoring. In the MC2 I am not using the module diagnostics for VREF, however assuming it still reports that information to the headmaster.



This is on a 12v system and the only place the 5 volts is used is 7 switches (on/off) as a checksum/and direction change sense to high impedance analog inputs. I have done this before without issue however it was 2.6 software, this is the first one with 3.0 software.



I thought seeing as I can’t troubleshoot it at the moment I would ask and possibly save time if this already a known issue.

Are there any plans to add a high amperage output module to the IQAN platform?  Currently, we use the J1939 functionality to control Pran Systems PR3510 modules (15 Amp per output) for lights, wiper motors, and other high current loads but it would make things much less complicated if we could control everything from within one software application.