Hello!

I've been reading instruction book, but I'm not sure about this doubt. And have no MC43 at the moment to be tested.

In IQAN Design, when adding an MC43 module to the system, it doesn't have "RTC Enabled" property in its property inspector. But, I doubt if it has no internal RTC, or it does, but can't be disabled.

Does MC43 have RTC?

In case MC43 does NOT have RTC:

Will event logs always register the time from system startup? 

If there's another master in the system with enabled RTC, MD4 for instance, will the MC43 Logs take the time from the MD4 for its event logs?

Thanks!

Has anyone used any hardware to automatically change the back lighting of the IQAN displays (MD5 MD4 and MD3) automatically with the change of ambient light outside on a vehicle? I have a customer asking the best way to do this, any suggestions or assistance from anyone? Please let me know thanks. 

On the Iqan 4.07 + md4-7
I would like to put on my Md4 two identical iso symbol, but size is different colors.
When I go through User Interface / Image and I import my image, there is no problem.
When
I go through User Interface / MD4-7 display pages that I go to my page,
that I go through the addition of the live library, it is impossible to
integrate two identical iso symbols, but with a size or a color different, it's impossible. As soon as you change pages, the logos change automatically and become identical!

I updated iOS app to 5.01.4 yesterday and now I can not connect to any G11 modem. The app will see the module but when sending file to machine, I get a "Communication interface error" "Could not find services". When going into Bluetooth adapter configuration, it again sees the module but only show 0.00 on firmware, BIOS, and Hardware versions. Prior to this update, everything was working great. System is running 4.07.14.4747 on a MC42.

I have a question about "sms in channel".
I'm doing application like the following with the G3 modem and MC2.

I can't read this message from the software when I send a message to the gsm card that I plugged to G3 modem in externally. 

What could be the problem?
(But I can send a message from the g3 modem when I make a sms out application similar to this application.)

Hello,

I think it would be convenient to be able to grab a printout of what is on the simulated screen in a PNG or JPEG format. For documentation purposes primarily.

Right now Windows' Snipping Tool works but it's a very slow process and you have to be very precise. It also is impossible to get each screenshot to be the same size as the display's (MD4 in my case) screen.

Thank you.

Hi Does anyone have any knowledge of Ethercat and whether its possible to interface using this protocol with Iqan?

There seems to be a version of CANopen over ethercat and I was hoping it may be possible to use this? 

i've got a display page with 9 sliders on top of each other. 

Depending of which "tab" im in i show the sliders needed in that tab. 

This works great! exactly as i would like. 

But if i adjust a slider with my external control and then change "tab" (hiding the newly adjusted slide) my focus locks and wont move until i touch the newly present slider.

This is not true in the simulator, only on the physical MD4-10 display.

Robin

Has anyone been able to map the engine serial number for PGN 65259? I cannot make any sense of the mapping. pictures would help

DOUT under current detection.

I IQAN Design 4.** finns det möjlighet att välja bort under current detection för en DOUT channel, på t.ex en MC43 modul.

I IQAN Design 5.0** verkar inte den möjligheten finnas.

Det finns tillfällen jag matar t.ex. en Radiostyrning med en DOUT, och då får jag ett larm för open load, och kan följaktligen inte aktivera utgången.

Jag kan då lägga ett parallellt motstånd för att undvika detta, men det vore enklare om vi kunde välja bort larmfunktionen i programvaran. Finns det något bra sätt ?