I've installed IQANrun ver 5.01.4 on a new IPAD Pro 10.5 with iOS 11.3.1

I am trying to place a .idax project file ver 5.02 onto the tablet so I can load it through the app.

I purchased the PRO capabilities to allow download from the app.

Under "Manage Files" if I select Dropbox, the app pops up "No Dropbox access".  It goes on to say that a web form will display next but none appears.  So I'm unable to use the Dropbox method.

Where can I place a file so the app will find it?  (similar to IQANsync where the app looks in On My Pad/IQANsync)

We have built identical machine, running identical software on MC42's, with the idea of only having one MD4-7 display between these machines as a diagnostics/adjustment tool that is configured as "optional". This would allow for when connecting the display to the MC42, the technician will then be able to interface with the MC42 to adjust parameters.

Also I use the MD4-7 as a programming tool to upload new software onto the machines VIA the display's ethernet port... But what I have encountered is after uploading all the software on both the machines and then plug the display back into the other machine it give a "NO contact MC42" error. Which means I have to upload the software again with the display in place to get contact to that MC42. So each time I want to use the display to configure the other machine I have to do a software upload again from the laptop.

In theory I can't see why this wouldn't work? the display does not store any values, it only displays the parameters that is stored on the MC42's which allows the to technician to adjust those parameters on the MC42 through the MD4-7 display.

I have also tried to upload the software separately on the display only (as an incomplete system), but then it gives "no Contact" error on both machines until I upload the software again with the display in place.

There must be a way to trick the display to think it is connected to the same machine each time it gets swapped around between the 2 machines.

I'm not able to load files using IQAN Sync for Android. It gives error message something like "  No argument for format fmx:iqansync:=uri =connect// ". Same software has been loaded successfully to device with IQAN design and ethernet cable.

Are there any regional limitations to where the IQANrun for iPad is available?  I have a customer in New Zealand who cannot find any IQAN products in the Apple store.

Anyone know if there is a way to make a pin code value visible on an MD4 using a standard PCC and not using a channel to send the value into the PCC?

I am using a digital output channel on a proportional coil (I ran out of current outs). I would like to be able to adjust the peak time and hold value in an adjust group so I can test my ranges out with out doing a download every time I make a change.

Hi,

I need some advice regarding physical connection of SAE-J1939 between 2 modules fitted on separate machines.

Are there any arguments against to connect it by using RJ45 connectors?

I would like to use a HARTING modular connector with RJ45 insert but I'm not sure if it is a good idea.

Hello.

I think it would be a good improvement if we can give to states in FSM the order that we want (not only be allowed to order states in a list)
In this way, if our fsm has some ramifications, we can use any kind of code to give the order to the state and in this way it would be easier to develop the application.
For example, in this image, if we use 2x numbers to the top line, if we need to add a new state between 21 and 22, and the dout must be active also in the new state, it is easier to have something like inside 20 and 29 than add this new state to active if state=20, state=21, state=22...

Not sure if I'm using FSM in the correct way or there is other way to do this, but FSM works really nice

Hi there,

Does anyone have a video with the image from IQAN SV camera? 

I'm using now a BRIGADE camera but I'm not happy with the quality of image.

Thanks in advance.

Damian