where on the MC41 I connect LED lamp and how is it controlled it via the program

Has anyone had any experience whereby they have used a single IQAN PWM out with a 5A load ?  The data sheets say "no" but I am just wondering if this is possible if the number of outputs used simultaneously, is controlled.

I have a MC41 setup where I need to use a bidirectionnal CAM output in PWM mode to drive a bidirectional valve (2 coils). There is a mention to not use a flyback diode in closed loop control but is it ok to add diodes on coils if the outputs are used in PWM mode, not in current output? I tried it and it seems to work just fine.

I want to add diodes as there will be an emergency operation switch installed to directly power the coils. We want the diodes to prevent high voltage spikes to the MC41 module and the switches.

Found on the forum:

With IQAN-MC3 and IQAN-MC43, -MC42 and -MC41, the internal clamping diode is not disconnected when COUT pins are used as open control PWM.

Does that mean that we do not need to add diodes?

Does the MC43 have a Real Time Clock? Does it need one?

With the new MC42 and MC43 master modules, I see you have the ability to communicate via Ethernet communication port. Where can I find this part?